|
|
 | |  |
 |
Maxflow Air Flow Sensors & Sampling Tubes Hose Ends
We offer 3 different sizes of Mass Air Flow Sensor for the Ford V8 engine. The Maxflow sensors are available in 65mm, 73mm and 80mm allowing you to customise your performance application. The beauty of the Maxflow sensor is that you can quickly and easily change internal sample tubes in the field to recalibrate for almost any circumstance.
These sensors are a must when installing a supercharger on any Ford - as the standard Mass Air is pushed quickly out of range by the increased air flow potential of the engine. Selecting the right meter for your application in critical for the best results - email us for assistance.
| |
 |
 | |  |
| | |
|
65, 73 or 80mm Maxflow MAF | 
|
8A101-021 | 65mm Maxflow MAF | $ 475.00 | 8A101-022 | 73mm Maxflow MAF | $ 475.00 | 8A102-023 | 80mm Maxflow MAF | $ 540.00 |
Sample Tube, 73mm MAF
19lbs, 24lbs, 30lbs, 38lbs
Samples Tube, 80mm MAF
30lbs, 38lbs, 42lbs | 
|
8A001-021 | Sample Tube 19 lbs/hr, 73mm MAF (Clear) | $ 67.00 | 8A001-022 | Sample Tube 24 lbs/hr, 73mm MAF (Blue) | $ 67.00 | 8A001-023 | Sample Tube 30 lbs/hr, 73mm MAF (Red) | $ 67.00 | 8A001-024 | Sample Tube 38 lbs/hr, 73mm MAF (Green) | $ 67.00 | 8A001-026 | Sample Tube 30 lbs/hr, 80mm MAF | $ 67.00 | 8A001-022 | Sample Tube 38 lbs/hr, 80mm MAF | $ 67.00 | 8A001-024 | Sample Tube 42 lbs/hr, 80mm MAF | $ 67.00 |
|
|
|
|
|
|
| |
|
| | |
©2007 launchperformance.com.au ~ Launch Performance™ |
|
